ROSEMOUNT 3051S SERIES PRODUCT DATA SHEET

Permanently mark the approval label to distinguish it from unused approval types. ANSI class 3-in. Transmitters withstand the following limits without damage: This must be taken into account when installing the apparatus. The S2CD0 is limited to 2: A Configuration Data Sheet must be completed see page The breakdown current shall be less than 5 mA, when V, 47 to 62 Hz, is applied for one minute.

The completely assembled, ready to install flowmeters reduce cost and simplify installation. Grafoil is a trademark of Union Carbide Corp. Requires option code C1, custom software configuration. PID, arith, signal char, integ, etc. PlantWeb housing material determined by Housing Style code. Should the housing be replaced after initial supply to another Model S housing, the replacement housing shall have the same certification marking code information as the housing it replaces. The user must ensure that the maximum rated voltage and current

Values mA the transmitter outputs if applied pressure goes outside the 4—20 mA range values. Add Weight In lb kg 6.

Rosemount 3051S Series

For spans 3015s than The S SIS specifications are the same as Classic performance transmitters with the exception of the following: PID, arith, signal char, integ, etc. Rosemount ProPlate, Mass ProPlate, and These integral orifice flowmeters eliminate the inaccuracies that become more pronounced in small orifice line installations. It is a condition of safe use that dielectric strength test shall be applied whenever the terminal block is changed or replaced in either the dual compartment or single compartment housings.

  MAUSAM HAI AASHIQANA STAGE DRAMA FULL PART 1

Orifice Plate Primary Element Systems: Environmental limits apply to certain materials. For housing, material is aluminum with polyurethane paint. Process adapters option D2 and Rosemount integral manifolds must be ordered with the transmitter.

Transmitters withstand the following limits without damage: Rosemount and Orifice Plates, Flange Unions and Meter Sections A comprehensive offering of orifice plates, flange unions and meter sections that is easy to specify and order. ANSI class 2-in. PlantWeb is a mark of one of the Emerson Process Management companies. This software damping is in addition to sensor module response time.

Add to collection s Add to saved. Remote mount LCD display and interface, ft. Gas measurement approval only.

Cable entries and blanking plugs must be suitable for the ambient range of the apparatus and capable of withstanding a 7J impact test. Once a device labeled with multiple approval types is installed, it should not be reinstalled using any other approval types.

The breakdown current shall be less than 5 mA, when V, 47 to 62 Hz, is applied for one minute. At atmospheric pressures and above.

Grafoil seroes a trademark of Union Carbide Corp. Rosemount Diaphragm Seals Provides reliable, remote measurements of process pressure and protects the transmitter from hot, corrosive, or viscous fluids.

Rosemount and Integral Manifolds Factory-assembled, calibrated and seal-tested manifolds reduce on-site installation costs.

Cable entries must be used which maintain prooduct ingress protection of the enclosure to at least IP You can add this document to your study collection s Sign in Available only to authorized users.

  SEALY POSTUREPEDIC GEL SERIES CRISTALLE PLUSH EURO PILLOWTOP KING MATTRESS

This must be taken into account when installing the apparatus. Silicone D D.

Rosemount S Series

ANSI class 3-in. The S2CD0 is limited to 2: It is a condition of safe use that each transmitter module shall be used with a Model S housing, in order to comply with Flame-Proof requirements. Digital process variable superimposed on 4—20 mA signal, available to any host that conforms to the HART protocol. Where only one entry is used for connection to external circuits, the unused entry shall be closed by means of the blanking plug supplied by the equipment manufacturer or by a suitable Standards Australia certified blanking plug.

You can add this document to your saved list Sign in Available only to authorized users. S2 Text – Figshare. Unprecedented reliability backed by a limited year 3015s Further enhance installation practices and advanced diagnostic capabilities with the most reliable platform supported by a year warranty.

For spans less than 2: Requires option code C1, custom software configuration. Limit is flange rating or sensor rating, whichever is lower see the table below.